A hollow sphere of diameter $0.2 \text{ m}$ and mass $2 \text{ kg}$ is rolling on an inclined plane with velocity $v = 0.5 \text{ m/s}$. The kinetic energy of the sphere is:

From a circular ring of mass $M$ and radius $R$, an arc corresponding to a $90^\circ$ sector is removed. The moment of inertia of the remaining part of the ring about an axis passing through the centre of the ring and perpendicular to the plane of the ring is $K$ times $MR^2$. The value of $K$ will be:

The moment of inertia of a uniform circular disc of radius $R$ and mass $M$ about an axis touching the disc at its edge and normal to the disc is:

A solid cylinder of mass $2 \text{ kg}$ and radius $4 \text{ cm}$ is rotating about its axis at the rate of $3 \text{ rpm}$. The torque required to stop after $2\pi$ revolutions is:

Three identical spherical shells, each of mass $m$ and radius $r$ are placed as shown in the figure. Consider an axis $XX'$, which is touching two shells and passing through the diameter of the third shell. The moment of inertia of the system consisting of these three spherical shells about the $XX'$ axis is:

A solid cylinder of mass $3 \text{ kg}$ is rolling on a horizontal surface with a velocity of $4 \text{ ms}^{-1}$. It collides with a horizontal spring of force constant $200 \text{ Nm}^{-1}$. The maximum compression produced in the spring will be:

The moment of inertia of a thin rod about an axis passing through its mid-point and perpendicular to the rod is $2400\text{ g cm}^2$. The length of the $400\text{ g}$ rod is nearly:

A solid sphere is in rolling motion. In rolling motion, a body possesses translational kinetic energy ($K_t$) as well as rotational kinetic energy ($K_r$) simultaneously. The ratio $K_t : (K_t + K_r)$ for the sphere will be:

An energy of $484 \text{ J}$ is spent in increasing the speed of a flywheel from $60 \text{ rpm}$ to $360 \text{ rpm}$. The moment of inertia of the flywheel is: