back to directory
NEET PHYSICSALTERNATING CURRENTEasy

Question

The core of a transformer is laminated so that:

A

energy losses due to eddy currents may be minimized

B

the weight of the transformer may be reduced

C

rusting of the core may be prevented

D

the ratio of voltage in primary and secondary may be increased

Step-by-Step Solution

In a transformer, the changing magnetic flux induces small circulating currents called eddy currents in the iron core. These currents produce heat (I2RI^2R loss) and waste energy. To minimize this, the core is laminated, meaning it is made of thin sheets of steel insulated from each other. This increases the resistance to the path of the eddy currents, thereby reducing their magnitude and the consequent energy loss .

Exam Context & Concepts Covered

This question aligns with the NEET PHYSICS syllabus, specifically targeting concepts from ALTERNATING CURRENT. Mastering this topic is crucial for scoring well in the upcoming medical entrance examinations. Solving conceptually related problems will help you understand the nuances of these concepts and improve your problem-solving speed.

PHYSICSALTERNATING CURRENTtransformerlaminated

More ALTERNATING CURRENT Questions

View all

In an alternating current circuit consisting of elements in series, the current increases on increasing the frequency of the supply. Which of the following elements are likely to constitute the circuit? (a) Only resistor (b) Resistor and an inductor (c) Resistor and a capacitor (d) Only a capacitor

A.(b), (c)
B.(a), (d)
C.(b), (d)
D.(c), (d)
MediumSolve

An AC source given by $V = V_m \sin(\omega t)$ is connected to a pure inductor $L$ in a circuit and $I_m$ is the peak value of the AC current. The instantaneous power supplied to the inductor is:

A.$\frac{V_m I_m}{2} \sin(2\omega t)$
B.$-\frac{V_m I_m}{2} \sin(2\omega t)$
C.$V_m I_m \sin^2(\omega t)$
D.$-V_m I_m \sin^2(\omega t)$
MediumSolve

A transformer having efficiency of 90% is working on 200 V and 3 kW power supply. If the current in the secondary coil is 6A, the voltage across the secondary coil and the current in the primary coil respectively are:

A.300 V, 15 A
B.450 V, 15 A
C.450 V, 13.5 A
D.600 V, 15 A
MediumSolve

A standard filament lamp consumes 100 W when connected to a 200 V AC mains supply. The peak current through the bulb will be:

A.0.707 A
B.1 A
C.1.414 A
D.2 A
EasySolve

The net impedance of the circuit (as shown in the figure) will be:

A.25 $\Omega$
B.$10\sqrt{2} \ \Omega$
C.15 $\Omega$
D.$5\sqrt{5} \ \Omega$
MediumSolve

A 12 V, 60 W lamp is connected to the secondary of a step-down transformer, whose primary is connected to AC mains of 220 V. Assuming the transformer to be ideal, what is the current in the primary winding?

A.0.37 A
B.0.27 A
C.2.7 A
D.3.7 A
EasySolve

The variation of EMF with time for four types of generators is shown in the figures. Which amongst them can be called AC voltage?

A.(a) and (d)
B.(a), (b), (c), and (d)
C.(a) and (b)
D.only (a)
EasySolve

An inductor of inductance L, a capacitor of capacitance C and a resistor of resistance R are connected in series to an AC source of potential difference V volts. The potential difference across L, C and R is 40 V, 10 V and 40 V, respectively. The amplitude of the current flowing through the LCR series circuit is $10\sqrt{2}$ A. The impedance of the circuit will be:

A.4 $\Omega$
B.5 $\Omega$
C.$4\sqrt{2} \ \Omega$
D.$5\sqrt{2} \ \Omega$
MediumSolve

This neet physics practice question is part of the TopperSquare free question bank. TopperSquare offers 15,000+ chapter-wise NEET MCQs across Physics, Chemistry, and Biology with detailed step-by-step explanations, full mock tests, NEET PYQs (2010–2024), and an AI-powered performance analytics dashboard. browse all neet practice questions → · practice physics sets →